top of page
VIBRA-CHECK HEAVY LOAD MOUNTING PAD
Unpatterned surface. For machinery loads in the 150-3600 psi range

VIBRA-CHECK HEAVY LOAD for larger machinery and equipment is similar in construction to Vibra-Check Standard and offers all of its many advantages. Machinery can be relocated easier, faster and at less cost, leaving your floors in top condition.  The HEAVY LOAD surface is unpatterned.

Field installations and independent laboratory tests * prove that HEAVY LOAD effectively reduces vibration and noise. Test results are shown below.

*Avco Enviromental Testing Laboratory

​

MATERIAL SIZES

VIBRA-CHECK HEAVY LOAD is available in the following thicknesses:

1/4", 3/8", 1/2", and 3/4".

 

The sheet size is 17" x 20".

​

Thickness 5/8" is available only in 22" x 23"

Sizes above can be shipped immediately from stock. Distributors of HEAVY LOAD are located throughout the U.S., Canada, Europe and Mexico.

VIBRA-CHECK Heavy Load may be cut to your specifications upon request, at a nominal fee.

NOTE: All graphs describe 3/4" HEAVY LOAD.

​

CHARACTERISTIC OF 3/4" VIBRA-CHECK HEAVY LOAD

​

Optimum Loading Range

Natural Frequency vs Load (Static)

Load vs Deflection

Load Deflection vs Recovery

Transmissibility

Effects of Temperature Change at 330 psi:

      -50º F

      Room Temperature

      +230º F

Note: Between temperature limits listed above, VIBRA-CHECK HEAVY LOAD retains its general characteristics.

​

la foto 5.JPG

150-3600 psi

See Fig. 1

See Fig. 2

See Fig. 3

See Fig. 4

​

fn = 40 Hz

fn = 46 Hz

fn = 57 Hz

DSC02977 (1).JPG
Screen Shot 2018-09-02 at 15.31.30.png
la foto 1.JPG
la foto 2.JPG
la foto 3.JPG
la foto 4.JPG
bottom of page